EGM系列是立式直聯、單級單吸管道離心泵，泵結構為上部開式結構，檢修時可從頂部抽出泵轉子部件，不需拆卸進出口管路。泵的進出口位于同一水平線上且進出口口徑一致，可直接像閥門一樣安裝在管路的任何部位，該系列產品結構簡單，機泵采用穿軸式連接，且水泵有獨立的軸承支撐，機泵同心度高，機組運行噪音小，穩定可靠、效率高；維護方便，易拆易裝，定位精確可靠等優點。
適用于輸送清水及物理化學性質類似于水的介質，介質溫度：-10℃~85℃，液體運動粘度應小于20cSt（大于20cSt時性能需要修正）且不含有任何可能對泵造成機械或化學侵害的固體顆粒或纖維液體。
環境溫度：環境溫度不得超過40℃；超過40℃，電機應降低功率使用。
Product Description
| Pump type | EG series vertical single stage in-line centrifugal pump |
| Design Standard | European standard BS EN733/DIN24255 |
| Structure | Vertical,Single-Stage,Single-Suction,Volute Casing,In-line,Close-coupled |
| Discharge Size | DN40~200mm |
| Flange | DIN2501 PN16 GB/T17241.6 PN1.6 |
| Motor | IEC standard motor |
| Casing | Cast Iron standard,Ductile Iron options on request |
| Impeller | Brass standard,Cast Iron/ASTM304/ASTM316 options on request |
| Shaft | ASTM420 standard,ASTM304/ASTM316/ASTM1045 options on request |
| Shaft Seal | Mechanical Seal standard |
| Flow Rate(Q) | 4~500m3/h |
| Head(H) | 8~150m |
| Speed | 1450/2900rpm(50Hz),1750/3500 rpm(60Hz) |
| Max Temperature | 85°C(standard) |
| Working Pressure | 1.0MPa standard;1.6MPa(option on request) |
| Conveying Medium | Clean water or liquids similar to clean water in physical property |
| Advantage | sharply reduce installation space,motor shaft is pluged into pump shaft to ensure alignment of pump and motor,voice-saving,high-effective. |
| Appliactions | Cold and hot water circulation pump,municipal water supply,HVAC and Cooling Tower,booster pump,irrigation and agriculture,pool and fountain water transfer,etc. |