英國GRIMM格林進口單螺桿泵 UK GRIMMImported single screw pump

英國GRIMM格林進口單螺桿泵概述：
進口單螺桿泵是按迥轉嚙合容積式原理工作的新型泵種，主要工作部件是偏心螺桿(轉子)和固定的襯套(定子)。
由于該二部件的特殊幾何形狀，分別開成單獨的密封容腔，介質由軸向均勻推行流動，內部流速低，容積保持不變，壓力穩定，因面不會產生渦流和攪動。每級泵的輸出壓力為0.6MPa，揚程60m(清水)，自吸高度一般在6m，適用于輸送介質溫度80℃以下(特殊要求可達150℃)。
因定子選用多種彈性材料制成，所以這種泵對高粘度流體的輸送和含有硬質懸浮顆粒介質或含有纖維介質的輸送，有一般泵種所以能勝任的特性，其流量與轉速成正比。
傳動可采用聯軸器直接傳動，或采用調速電機，三角帶，變速箱等裝置變速。這種泵零件少，結構緊湊，體積小，維修簡便，轉子和定子是本泵的易損件，結構簡單，便于裝拆。

英國GRIMM格林進口單螺桿泵工作原理及特性：

進口單螺桿泵的工作原理是單線螺旋的轉子在雙線螺旋的定子孔內繞定子軸線作行星回轉時，轉子——定子副之間形成的密閉腔就連續的、勻速的、容積不變的將介質從吸入端輸送到壓出端。由于這巧妙的工作原理，使單螺桿泵具有一般性泵的通用性能外。其最顯著的特點：
1、可輸送高粘度的介質。根據泵的大小不同，介質的最高粘度為37000厘泊-200000厘泊。
2、可輸送含固體顆粒、磨削顆粒和纖維的介質。其含量一般可高達介質的40%，當介質中所含固體為粉末狀細微顆粒時，最高可達70%，根據泵的大小不同允許介質中所含固體顆粒粒徑最大為2毫米——40毫米。
3、輸出的液體連續均勻、壓力穩定、攪動小，對敏感性的液體不會發生成分的改變。
4、流量與轉速之間為簡單的正比關系?？赏ㄟ^調節轉速進行流量的調節，配上變速的電動機，可成為變量泵。
5、壓力能隨輸出管道阻力自動調節。在0-36(公斤/厘米2)壓力之間，用戶很容易調到所需的壓力。這樣既節能，又避免壓力太高或太低而影響工藝流程。
6、結構簡單、磨損少、維修方便。
與其它類型泵相比：
和離心泵相比，單螺桿泵不需要裝閥門，而流量是穩定的線性流動。
和柱塞泵相比，單螺桿泵具有更好的自吸能力，吸上高度可達8.5米水柱。
和隔膜泵相比，單螺桿泵可輸送各種混合雜質，含有氣體及固體顆?；蚶w維的介質，也可輸送各種腐蝕性物質。
和齒輪泵相比，單螺桿泵可輸送高粘度的物質。
與柱塞泵、隔膜泵及齒輪泵不同的是，單螺桿泵可用于藥劑填充和計量。

英國GRIMM格林進口單螺桿泵主要參數：
span style="color:#000000;">流 量：0.8-150m3/h
揚 程：60-120m
壓 力：0.6-1.2MPa
進口口徑：25-200mm
出口口徑：25-250mm
自吸高度：6m
轉 速：400-960r/min
功 率：0.75-37kw
材 質：鑄鐵、不銹鋼

英國GRIMM格林進口單螺桿泵適用范圍：

進口單螺桿泵作為一種能用泵，流量可以根據要求，通過改變速度進行調節，運行速度可高可低，出口壓力可隨泵的級數增加而增加，每增加一級，壓力增加0.6MPa，在以下范圍和行業廣泛應用。
1、環境保護：工業污水、生活污水、含有固體顆粒及短纖維的污泥濁水的輸送，特別適用于油水分離器、板框壓濾機等設備；
2、船舶工業：輪底清潔、油水、油渣、油污水等介質的輸送；
3、石油工業：輸送源油、原油與水的混合物、煤田氣和水的混合物、往地層內灌注聚合物等等，從而降低了機械采油、采煤田氣的成本，增加了油口采收率；
4、醫藥、日化、各種粘稠漿、乳化液、各種軟膏化狀品的輸送；
5、食品罐頭工業：各種粘稠淀粉、食油、蜂蜜、糖漿、果漿、奶油、魚靡肉糜以及其下腳料的輸送；
6、釀造工業：各種發酵粘稠漿液、濃酒漕、糧食制品渣、各種醬類、漿類和含有塊狀固態物的粘液等；
7、建筑工業：水泥砂漿、石灰漿、涂料及其它糊狀體的噴涂與輸送；
8、采礦工業：礦井內的含有固體顆粒的地下水和污漿水排送到地面；
9、化學工業：各種懸浮液、油脂、各種膠體漿、各種粘合劑；
10、印刷、造紙工業：高粘度油墨、高分子塑料和各種濃度的紙漿、短纖維漿的輸送。
11、工業鍋爐、電廠：水煤漿的輸送。

UK GRIMMImported single screw pumpsummary:

The import of single screw pump is a new type of pump to mesh volume by circumventing the work principle, the main working parts are eccentric screw (rotor) and fixed lining (stator).

Due to the special geometry of the two parts, respectively, into a separate sealing cavity, medium introduced by the uniform axial flow, internal flow rate is low, the volume remained unchanged, the stable pressure, because the surface does not produce eddy current and stirring. The output pressure of each stage pump is 0.6MPa, the head 60m (clean water), the self-priming height is generally at 6m, suitable for conveying medium temperature below 80 degrees (special requirements up to 150 degrees Celsius).

Because of the stator made of various elastic material, so the pump for high viscosity fluid and suspended particles containing medium or hard with fiber transmission medium, a general pump can do so, the flow rate is proportional to the speed.

Transmission can be driven directly by coupling, or by speed control motor, V-belt, transmission and other devices. The pump has the advantages of few parts, compact structure, small size, easy maintenance, and the rotor and the stator are the wearing parts of the pump. The utility model has the advantages of simple structure and easy assembly and disassembly.

UK GRIMMImported single screw pumpoperating principle and characteristics:

The working principle of single screw pump imported is single rotor in the stator screw hole in the bifilar helix around the stator axis for planetary rotation, the rotor and stator side sealed cavity formed between the constant volume of continuous, uniform, medium from the suction side to the extrusion end conveyor. Because of this ingenious working principle, the single screw pump has the general performance of the general pump. Its most striking features:

1.Can transport high viscosity medium. According to the pumps of different sizes, the highest viscosity medium for 37000 centipoise CPS -200000.

2.Conveying medium containing solid particles, grinding particles and fibers. The general content of the medium can be as high as 40%, when the medium contained in the solid fine powder particles, up to 70%, according to the pumps of different sizes to allow medium containing solid particles to a maximum of 2 mm - 40 mm.

3.The output of liquid continuous uniform, stable pressure, stirring little, the sensitive liquid will not change the composition.

4.Flow and speed is a simple direct relationship. By adjusting the speed of flow adjustment, coupled with the variable speed motor, variable pump can be.

5.The pressure can be adjusted automatically with the resistance of the output pipe. At 0-36 (kg/cm, 2) pressure, the user is easily transferred to the required pressure. This will save energy and avoid too high or too low pressure to affect the process.

6.Simple structure, less wear and easy maintenance.

Compared with other types of pumps:

Compared with centrifugal pumps, the single screw pump does not need to install the valve, and the flow is a steady linear flow.

Compared with the plunger pump, single screw pump has better self-priming capacity, suction height of up to 8.5 meters water column.

Compared with diaphragm pumps, single screw pump can transport a variety of mixed impurities, containing gas and solid particles or fiber medium, can also transport a variety of corrosive substances.

Compared with gear pumps, single screw pumps deliver high viscosity materials.

Unlike piston pumps, diaphragm pumps, and gear pumps, single screw pumps can be used for pharmaceutical filling and metering.

UK GRIMMImported single screw pumptechnical parameter:

Flow rate: 0.8-150m3/h

Lift: 60-120m

Pressure: 0.6-1.2MPa

Import caliber: 25-200mm

Export caliber: 25-250mm

Self suction height: 6M

Speed: 400-960r/min

Power: 0.75-37kw

Material: cast iron, stainless steel

UK GRIMMImported single screw pumpscope of application:

The import of single screw pump is a pump, the flow can be adjusted according to the requirements by changing the speed, running speed can be high or low, outlet pressure increases with the increase of pump series, every level increase, the pressure increase of 0.6MPa, widely used in industry and the scope of the following.

1.Environmental protection: transfer of filthy mire containing solid particles and short fiber, industrial wastewater and domestic wastewater, especially suitable for oil-water separator, filter press equipment etc.;

2.The ship industry: transfer of bottom cleaning, water, diesel oil, water and other medium;

3.The oil industry: transfer of source oil, crude oil and water mixture, coal gas and water mixture, pouring polymer into the stratum, thus reducing the mechanical oil and coal field gas cost, increase oil recovery;

4.Medicine, daily chemicals, all kinds of sticky pulp, emulsion, all kinds of ointment shaped products;

5.Canned food industry: all kinds of ropy starch, edible oil, honey, syrup, juice, butter, fish and meat and its leftover delivery;

6.Brewing industry: all kinds of fermented viscous slurry, concentrated wine, food products, slag, all kinds of sauce, pulp and containing solid mass of mucus and so on;

7.Construction industry: spraying and conveying of cement mortar, lime slurry, coating and other pastes;

8.The mining industry: the mine containing solid particles ground watersewage up to the ground;

9.Chemical industry: all kinds of suspension, grease, all kinds of colloidal pulp, various adhesives;

10.Printing and paper industry: high viscosity ink, high polymer plastic and various concentrations of pulp, staple fiber, pulp transmission.

11.Industrial boilers and power plants: coal water slurry transportation.