英國GRIMM格林進口雙螺桿泵 UK GRIMMImported twin screw pump

英國GRIMM格林進口雙螺桿泵概述： 進口雙螺桿泵在工作過程中，螺桿與螺桿兩個以及螺桿與襯孔之間形成密封腔，液體經進口進入泵內，然后進入密封腔，隨著螺桿的回轉運動，由進口處平穩的被輸送到出口處。襯孔的相對位置由止口定位，螺桿軸由軸承支承定位，而工作期間保持螺桿和螺桿之間、以及螺桿與襯孔之間互不接觸。因而，泵允許短時間干運轉；并允許輸送各種液體介質（如非牛頓液體、潤滑性液體、非潤滑性液體等）。因進口流道的特殊設計以及工作時液體的軸向速度相對較小，因此泵的NPSHr值佷小，有很好的自吸能力。軸承和同步齒輪由齒輪箱中的齒輪油潤滑。

可方便的拆下泵體聯接螺釘，從而直接清洗泵體、螺旋套及機械密封，過流部分無死角?？捎脺囟鹊陀?80℃的蒸汽或其他介質對泵進行清洗或消毒。泵的出口科可自行安裝安全措施（如溢流閥、壓力控制閥、安全閥等）。如需要，泵機組可提供為移動式（底座由四個小輪和牽引扶手）。

英國GRIMM格林進口雙螺桿泵特點：

1、結構先進，性能優越：改變傳統高壓平衡技術，采用主、從桿的軸向力低壓平衡裝置，受力平衡均勻，螺桿不變形，運行可靠穩定，無脈動，噪音低；
2、獨特設計，密封可靠：泵采用機械密封形式，密封腔壓力與吸入壓力相通，同時結構設計上對密封充分冷卻循環，保證密封效果，無泄漏；
3、優化改進，外形美觀：改變傳統的進、出口的位置，使得進出口分布在泵兩側并成一條直線，外形美觀，同時在設計上進行創新，在用戶現場不用改變管線就可實現進出口的互換；
4、泵芯組件，方便維修和配件更換：泵結構簡單緊湊，泵芯總成采用組件式結構，可整體取出，便于維護、修理；
5、安全閥組件，保護產品安全：產品所配安全閥可以瞬間保護泵，防過載，但不能作為管道的溢流閥使用；
6、進出口多種組合形式，方便現場管道連接；
7、多種安裝方式，更好滿足工況安裝要求。

英國GRIMM格林進口雙螺桿泵主要參數：
span style="color:#000000;">流 量：0.8-160m3/h
工作壓力：1.2Mpa
轉 速：750-1450rpm
功 率：0.5-160kw
使用溫度：150℃
粘 度：100000mm2/s
吸上高度：8m
殼體壓力：1.6Mpa

英國GRIMM格林進口雙螺桿泵應用領域：

石油業：各種潤滑油、液壓油、重油、渣油、原油和柴油。
化工業：各種酸、堿、鹽液，樹脂、甘油、石蠟和其他化工原料。
油漆業：油墨、各種油漆、顏料、涂料等。
食品業：酒精、酒類、蜂蜜、糖漿、牙膏、牛奶、奶油、醬油、動植物油等。
建材業：各種重油、渣油、煤焦油等。

UK GRIMMImported twin screw pumpsummary:

Imported double screw pump in the work process, the seal cavity is formed between the screw and screw and two screw and liner hole, liquid through the entrance into the pump, and then into the seal cavity, with the rotary motion of the screw, the inlet steady is transported to the outlet. The relative position of the lining hole is positioned by the stopper, the screw shaft is supported by the bearing, and the contact between the screw rod and the screw rod and the screw rod and the lining hole are not contacted during the operation. As a result, the pump allows for short periods of dry running and permits the delivery of various liquid mediums (such as non Newtonian fluids, lubricating fluids, non lubricating liquids, etc.). Because of the special design and the inlet channel when the liquid axial velocity is relatively small, so the pump NPSHr value is very small, self-priming ability good. The bearing and the synchronous gear are lubricated by gear oil in the gear box.

The utility model can conveniently remove the connecting screw of the pump body, so as to directly clean the pump body, the spiral sleeve and the mechanical seal, and the overflow part has no dead angle. Pumps can be cleaned or sterilized by steam or other medium at temperatures below 180 degrees celsius. The outlet of the pump is ready to install security measures (such as overflow valve, pressure control valve, safety valve etc.). If necessary, the pump unit can be supplied as mobile (the chassis consists of four small wheels and a traction handrail).

UK GRIMMImported twin screw pump characteristic:

1.Advanced structure, superior performance: to change the traditional high voltage balancing technology, from the axial force rod pressure balance device is adopted, the main force balance, uniform screw deformation, stable and reliable operation, no pulse, low noise;

2.Unique design, sealed reliable: the pump adopts mechanical seal form, the sealing cavity pressure and suction pressure interlinked, at the same time, the structure design on the sealing full cooling cycle, ensure the sealing effect, no leakage;

3.Optimization, appearance: to change the traditional import and export position, makes the import and export distribution in the pump side and into a straight line, beautiful shape, at the same time in design innovation, without changing the pipeline can realize the exchange of import and export on site;

4.Pump core components, easy maintenance and replacement parts: pump structure is simple and compact, the pump core assembly adopts a modular structure, can be taken out, easy to maintain and repair;

5.Safety valve components, protect product safety: products with safety valve can instantly protect the pump, overload, but can not be used as overflow valve of the pipeline;

6.Import and export a variety of combinations to facilitate on-site pipe connection;

7.A variety of installation methods to better meet the working conditions of installation requirements.

UK GRIMMImported twin screw pumptechnical parameter:

Flow rate: 0.8-160m3/h

Working pressure: 1.2Mpa

Speed: 750-1450rpm

Power: 0.5-160kw

Service temperature: 150 DEG C

Viscosity: 100000mm2/s

Suction height: 8m;

Shell pressure: 1.6Mpa

UK GRIMMImported twin screw pump application area:

Petroleum Industry: all kinds of lubricating oil, hydraulic oil, heavy oil, residual oil, crude oil and diesel oil.

Chemical industry: various acids, bases, salts, resins, glycerin, paraffin wax and other chemicals.

Paint industry: ink, various paint, pigment, paint, etc..

Food industry: alcohol, liquor, honey, syrup, toothpaste, milk, cream, soy sauce, animal and vegetable oils, etc..

Building materials industry: all kinds of heavy oil, residual oil, coal tar, etc..