英國GRIMM格林進口立式混流泵 UK GRIMMImported vertical mixed flow pump

英國GRIMM格林進口立式混流泵概述：

進口立式混流泵系立式單級導葉式混流泵(亦名：斜流泵)，具有流量大，安裝、運行穩定、效率高、汽蝕性能好等特點，壓出室采用導流體結構，有效減小了泵的徑向尺寸?？梢宰龀煽沙楹筒豢沙?、上出水和下出水、單級和多級、葉輪可調和不可調、淡水型號和海水型等各種結構，適用于吸送清水或物理、化學性質類似于水的其它液體，液體溫度不超過80℃，主要用于城市給排水、電站循環水、船塢水位升降、水利工程及農田排灌等。
進口立式混流泵均為立式結構，泵葉片為半調節式，在需要調節葉片角度時，可以松開葉片緊固螺釘，轉動葉片至所需要的角度，使各個葉片安放角一致，然后擰緊螺釘即可達到改變運行狀況的目的。
大型泵配用大型立式電機時，電機直接安裝在電機基礎梁上，電機軸與水泵軸聯軸器用鉸制孔用螺栓聯接。水泵運行的軸向力也由大型立式電機中的推力軸瓦承受。
泵的出水流道一般采用直管出水經擴散管后接出水拍門，大型泵也可采用虹吸式出水流道，配真空破壞閥斷流。

英國GRIMM格林進口立式混流泵性能及優點：br>

1、有世界上一流的水力模型，并用CFD流體計算技術改良葉輪及導葉體流道，泵效率特別高。

2、獨特的耐磨損設計，泵耐磨損性能好，使用壽命長。
3、有獨特的耐海水設計，能適應海水。
4、全加工中心加工的金屬模具鑄造，外表美觀，流道光滑。

英國GRIMM格林進口立式混流泵技術參數：

流 量：900～52000m3/h
揚 程：4.5～34.6m
口 徑：500～2400mm
轉 速：296～485r/min
功 率：450～4800kw
介質溫度：≤80℃
電 壓：380～10000V

英國GRIMM格林進口立式混流泵用途：

適用于吸送清水或物理、化學性質類似于水 其它液體，液體溫度不超過80℃，主要用于城市給排水、電站循環水、船塢水位升降、水利工程及農田排灌等。

UK GRIMMImported vertical mixed flow pumpsummary:

Import Department of vertical single-stage vertical mixed flow pump mixed flow pump (also called: oblique flow pump), with the flow characteristics, installation, stable operation, high efficiency, cavitation performance, chamber pressure by the diversion structure, effectively reduce the radial size of pump. Can be made and not pumping, pumping water and under water, single-stage and multi-stage impeller, adjustable, freshwater and seawater type type structure, suitable for carrying water or other liquid physical and chemical properties similar to water in the suction, the liquid temperature does not exceed 80 degrees, mainly for the city to drainage, power plant circulating water, water level, water conservancy project and dock farm irrigation.

Imported vertical mixed flow pump are pump blades for vertical structure, semi adjustable, adjustable blade angle in need, you can release the blade fastening screw, rotating blade to the desired angle, the blade angle, then tighten the screws can reach the purpose of changing operating conditions.

When a large pump is equipped with a large vertical motor, the motor is directly mounted on the base beam of the motor, and the motor shaft and the water pump shaft shaft are hinged with holes and are connected by bolts. The axial force of the pump is also borne by the thrust bush in the large vertical motor.

The water outlet pipe of the pump is usually made of straight pipe water, and the water pipe is connected with the water tap after the diffusion pipe. The large water pump can also adopt a siphon outlet channel, and the vacuum failure valve is used to stop the flow.

UK GRIMMImported vertical mixed flow pumpproperties and advantages:

1.The world's first-class hydraulic model, and the use of CFD fluid computing technology to improve the impeller and guide vanes flow channel, pump efficiency is particularly high.

2.Unique wear resistant design, pump wear resistance performance, long service life.

3, unique design of seawater resistance, can adapt to the sea.

4.The metal mold machined by the whole machining center has beautiful appearance and smooth runner.

UK GRIMMImported vertical mixed flow pumptechnical parameter:

Flow rate: 900 ~ 52000m3/h

Lift: 4.5 ~ 34.6m

Caliber: 500 ~ 2400mm

Speed: 296 ~ 485r/min

Power: 450 ~ 4800kw

Medium temperature: less than or equal to 80 DEG C

Voltage: 380 ~ 10000V

UK GRIMMImported vertical mixed flow pumppurpose:

For carrying water or the physical and chemical properties similar to water and other liquids in the suction, the liquid temperature does not exceed 80 degrees, mainly used for city water supply and drainage, power plant circulating water, water level, water conservancy project and dock farm irrigation.