英國GRIMM格林進口井用潛水泵 UK GRIMMSubmersible pumps for imported wells

英國GRIMM格林進口井用潛水泵概述：

進口井用潛水泵是根據國際標準設計的節能產品，廣泛應用于農田灌溉、工礦企業的供排水和高原、山區的人、畜用水。
進口井用潛水泵是由潛水泵和潛水電機組成一體潛入水下進行工作。具有結構簡單、體積小、重量輕、安裝、維修方便，運行安全、可靠、高效節能等特點。
進口井用耐熱潛水泵是與井用耐熱圈三相異步電動機直接聯成一體，組裝成的耐熱潛水電泵，耐熱水溫可達100℃， 是潛入井中，提取地?zé)崴挠行C(jī)具；地?zé)崾且环N最廉價，最清潔，用之不竭的最新能源，現今廣泛應用于采暖、醫療、洗浴、養殖、種植、工農業、工礦企業、娛樂服務、保健設施等許多方面。它具有泵機合一，結構簡單，運行可靠，無噪音，性能優良，機組效率高，安裝維修方便；并具有耐熱。防腐，抗老化等諸多特點，是提取地?zé)崴淖钚庐a(chǎn)品。

英國GRIMM格林進口井用潛水泵結構說明：

1、進口井用潛水泵為離心式或混流式；采用水潤滑軸承；與電機的聯接采用聯軸器剛性聯接。泵葉輪在電機帶動下旋轉產生離心力，使液體能量增加經泵殼的導流作用進行提水。在水泵上端設有逆止閥體，防止電泵停機時，因揚水管中倒流的水損壞工作部件。閥上有泄水孔，可將管路中的水緩緩放掉，防止冬天凍裂管路。(注：低揚程潛水泵不設逆止閥體)
2、電機為密閉充水濕式結構。電機定子繞組采用耐水(耐熱)的聚乙烯絕緣，尼龍護套多層結構的(耐熱)電磁線。導軸承及推力軸承均采用水潤滑材質。電機內部充滿清水，用以冷卻電機和潤滑軸承。電機底部裝有調壓膜，用以調整由電機溫升引起的機體內清水的脹縮壓差。電機的上端軸上裝有防砂機構，用來阻止水中泥砂進入機體內部。
3、管路部分：用以聯接電泵使其吊裝在機井中，將水輸送到地面上去。主要由短輸水管、輸水管、彎管、夾板等部件組成。短輸出管是輸水管路與電泵的連接過渡部件。彎管安裝在井口處，以改變水流的傳送方向。夾板是在電泵的安裝過程中吊裝和固定輸出管路。

英國GRIMM格林進口井用潛水泵使用條件：

1、電源要求：
(1)額定頻率為50赫茲，電機端額定電壓應保證為380±5％伏的三相交流電源(若用戶電壓為660伏時需特殊定貨)。
(2)變壓器負載功率不應超過其容量的75％。
(3)變壓器距井較遠時，應考慮輸電線線壓降，對功率大于45KW的電機，要求變壓器到井口距離不超過20米。對于高揚程潛水電泵，由于輸電線較長，必須考慮壓降損耗，要求輸電線規格比配電纜規格大兩個等級。采用單臺變壓器供電，要求變壓器輸出電壓400V-440V。
2、水質要求：
(1)一般無腐蝕性清水。
(2)水中含沙量不大于0.01％(質量比)。
(3)酸堿度PH值在6.5-8.5范圍內。
(4)水中氯離子含量不大于400毫克/升。
(5)硫化氫含量不大于1.5毫克/升。
(6)井用潛水泵對水溫不高于20℃。耐熱潛水電泵對水溫要求不高于100℃。
(7)不含有油類。
3、井筒要求：
正直、光滑、不得有凸起或井管錯位現象，井內徑不小于相應的機座號。

英國GRIMM格林進口井用潛水泵技術參數：

流 量：8-400m3/h
揚 程：10-600m
功 率：0.37-220kw
額定電流：2.5-443.2A
額定電壓：380±5％V，660V(需特殊定貨)
額定頻率：50HZ
機 座 號：100-350mm
機組徑向：96-330mm
出水管直徑：40-200mm

英國GRIMM格林進口井用潛水泵用途：

進口井用潛水泵廣泛應用于農田灌溉、工礦企業的供排水和高原、山區的人、畜用水。進口井用耐熱潛水泵廣泛應用于采暖、醫療、洗浴、養殖、種植、工農業、工礦企業、娛樂服務、保健設施等許多方面。

UK GRIMMSubmersible pumps for imported wellssummary:

The import of submersible electric pump is an energy-saving product design according to the international standard, widely used in agricultural irrigation, industrial and mining enterprises for drainage and plateau and mountainous areas, drinking water.

The pump is composed of submersible pump and submersible motor. It works underwater. The utility model has the advantages of simple structure, small size, light weight, convenient installation and maintenance, safe operation, reliability, high efficiency, energy saving, etc..

Well with submersible pump heat is directly connected with the well heat circle of three-phase asynchronous motor, the assembled heat submersible pump, hot water temperature can reach 100 DEG C, is an effective tool to sneak into the wells, extraction of geothermal water; geothermal energy is one of the cheapest, most clean, inexhaustible new energy, is widely used in many aspects of heating, bathing, medical, breeding, cultivation, agriculture, industrial and mining enterprises, entertainment services, health care facilities etc.. The utility model has the advantages of simple pump structure, reliable operation, no noise, good performance, high unit efficiency, convenient installation and maintenance, and heat resistance. Anti corrosion, anti-aging and many other characteristics, it is the latest product of geothermal water extraction.

UK GRIMMSubmersible pumps for imported wellsstructure description:

1.The submersible pump for the well is centrifugal or mixed flow. The water lubricated bearing is adopted. The coupling of the motor and the motor is connected by a rigid coupling. The pump impeller is driven by the motor to rotate to generate centrifugal force, so that the liquid energy is increased, and the water pumping is carried out by the diversion action of the pump shell. A non-return valve body is arranged at the upper end of the water pump to prevent the working parts of the water pump from being damaged by the backflow of water in the water pipe when the electric pump is stopped. The valve is provided with a drain hole of the water in the pipeline can be slowly discharged, to prevent the winter frost crack pipe. (Note: the low lift submersible pump does not have a non-return valve body)

2.The motor is closed water filled wet structure. The motor stator winding adopts water (heat resistant) polyethylene insulated, nylon sheath multilayer structure (heat resistant) electromagnetic wire. Guide bearings and thrust bearings are made of water lubricated material. The motor is filled with clean water to cool the motor and lubricate the bearings. The motor is arranged at the bottom of the pressure adjusting membrane, to adjust the motor temperature rise caused by the expansion and contraction of the water pressure difference. The upper end of the motor is provided with a sand prevention mechanism to prevent mud and sand from entering the interior of the machine.

3.Pipeline part: used to connect the electric pump, lifting it in the well, and transport the water to the ground. Mainly by short water pipe, water pipe, elbow, plywood and other components. The short output pipe is a connecting transition component between the water delivery pipe and the electric pump. The pipe is installed at the wellhead to change the direction of the flow. The clamping plate is lifting and fixing the output pipeline during the installation of the electric pump.

UK GRIMMSubmersible pumps for imported wellsconditions of use:

1.Power requirements:

(1) rated frequency is 50 Hz, the motor end rated voltage should be guaranteed to be 380 + 5% volts three-phase AC power supply (if the user voltage is 660 volts, special orders).

(2) the transformer load power should not exceed 75% of its capacity.

(3) when the transformer is far from the well, the voltage loss of the transmission line should be considered. The motor with power greater than 45KW requires that the distance from the transformer to the wellhead is not more than 20 meters. For high lift submersible pump, the transmission line is longer, must consider the pressure drop loss, transmission line cable specification requirements specifications than the two grade. The transformer output voltage is 400V-440V by using single transformer supply.

2.Water quality requirements:

(1) General non corrosive clean water.

(2) The sediment concentration in water is not more than 0.01% (mass ratio).

(3) PH value is within the range of 6.5-8.5.

(4) The content of chloride ion in water is not more than 400 mg / liter.

(5) Hydrogen sulfide content is not more than 1.5 mg / liter.

(6) The submersible pump for the well is not over 20 centigrade. Heat resistant submersible pump for water temperature is not higher than 100 degrees.

(7) Contains no oil.

3.Wellbore requirements:

Upright, smooth, must not have the bulge or the well pipe dislocation phenomenon, the well bore diameter is not less than the corresponding frame number.

UK GRIMMSubmersible pumps for imported wellstechnical parameter:

Flow rate: 8-400m3/h

Lift: 10-600m

Power: 0.37-220kw

Rated current: 2.5-443.2A

Rated voltage: 380 + 5%V, 660V (special order)

Rated frequency: 50HZ

Base number: 100-350mm

Unit radial: 96-330mm

Outlet pipe diameter: 40-200mm

UK GRIMMSubmersible pumps for imported wellspurpose:

The import of submersible pump is widely used in agricultural irrigation, industrial and mining enterprises for drainage and plateau and mountainous areas, drinking water. Imported hot water submersible pumps are widely used in heating, medical treatment, bathing, breeding, planting, industry and agriculture, industrial and mining enterprises, entertainment services, health care facilities and many other aspects.