英國GRIMM格林進口液下渣漿泵 UK GRIMMImported liquid slurry pump

英國GRIMM格林進口液下渣漿泵概述：

進口液下渣漿泵，浸入液下，是英國格林開發研制的新一代高效耐磨節能型立式渣漿泵，該系列采用國際上先進的固液兩相流理論，按最小損失原則設計，其過流部件的幾何形狀符合介質的流動狀態，減少了渦流和撞擊待局部與沿程水力損失，從而減輕了過流部件的磨損，搞高了水力效率，降低了運行噪音和振動，該系列泵過流部件采用高硬質高鉻合金材質，其材質具有高抗磨、抗腐蝕性、搞沖擊性性能，從而使其壽命提高。

進口液下渣漿泵是立式單級單吸懸臂式離心泵結構，葉輪為半開式葉輪，在葉輪吸入邊延伸處設有攪拌葉片。
該泵主要用于環保、市政工程、火力發電廠、加氣混凝土、煤氣焦化廠、煉油廠、煉鋼廠、采礦、造紙業、水泥廠、食品廠、印染等行業抽吸濃液、稠油、油渣、污濁液、泥漿、灰漿、流砂及城市排污溝道的流動污泥，以及含有泥砂渣物流體和有腐蝕性液體。GRYW型還可抽吸各種人畜糞便污水和大中沼氣池，沼氣工程時出料使用。GRYZ(S)型還可輸送高溫(500℃)的煤油、原油、瀝青、油渣等工況。

英國GRIMM格林進口液下渣漿泵結構說明：
進口液下渣漿泵為單級，單吸懸臂式結構，用軸承座，支承座，聯接管連接泵的水力部件，液體由出液管部件排出，泵的葉輪為半開式葉輪，在葉輪葉片進口延伸處設有攪拌葉片，該泵主要特點是在液下部件的泵軸，有足夠的剛度，葉輪，泵殼之間不設軸承，不采用軸封，可以輸送含有較大濃度固體顆粒的介質。泵插入液下的長度在800-2000之間，如果需要可以配帶吸入管。軸封采用液下泵插入液體中運行，不設軸封，傳動由立式電動機安裝在電機支承座上，用聯軸器與泵相連。

英國GRIMM格林進口液下渣漿泵技術參數：br> /span>

流量：12-413m3/h
揚程：4-60m
口徑：50-200mm
轉速：730-1480r/min
功率：1.1-90kw
電壓：380V

英國GRIMM格林進口液下渣漿泵適用范圍：span style="color:#000000;">
該泵主要用于環保、市政工程、火力發電廠、加氣混凝土、煤氣焦化廠、煉油廠、煉鋼廠、采礦、造紙業、水泥廠、食品廠、印染等行業抽吸濃液、稠油、油渣、污濁液、泥漿、灰漿、流砂及城市排污溝道的流動污泥，以及含有泥砂渣物流體和有腐蝕性液體。

UK GRIMMImported liquid slurry pumpsummary:

The import of slurry, liquid, is a new generation of high wear-resistant energy saving vertical slurry pump developed by the British Green, the series uses the international advanced solid-liquid two-phase flow theory, designed according to the principle of minimal loss, its flow components conform to the geometry of the flow medium, reduces the eddy current and the impact to the local along with the hydraulic loss, thereby reducing the abrasion of flow components, high hydraulic efficiency, reduce operation noise and vibration, the series of pump flow components of high rigid high chromium alloy material, the material has high abrasion resistance, corrosion resistance, impact performance, so as to improve its life.

The inlet liquid slurry pump is a vertical single stage single suction cantilever centrifugal pump structure. The impeller is a semi open impeller, and a stirring blade is arranged at the extending direction of the suction side of the impeller.

The pump is mainly used for environmental protection, municipal engineering, power plant, aerated concrete, gas coking plants, oil refineries, steel mills, mining, paper, cement factory, food factory, printing and dyeing industry, heavy oil, diesel oil, liquid suction dirty liquid, slurry, mortar, sewage flow channel sand and the flow of the city sludge and sand containing residue fluid and corrosive liquids. GRYW can also suck various kinds of human and livestock excrement, sewage and large and medium methane tank. GRYZ (S) type can also carry high temperature (500 DEG C) of kerosene, crude oil, asphalt, oil and other conditions.

UK GRIMMImported liquid slurry pumpstructure description:

The import of slurry for single-stage, single suction cantilever structure, bearing seat, bearing seat, the connecting pipe hydraulic components connected with the pump, the liquid from the liquid outlet pipe parts discharge pump impeller for semi open impeller with stirring blades in the impeller blade inlet extension, the pump is the main characteristics of pump shaft parts the liquid, with enough rigidity, impeller, pump shell bearing set between the seal, can be transported with high concentration of solid particles of the medium. The length of the pump is between 800-2000. If necessary, the suction pipe can be provided. The shaft seal adopts the liquid pump to insert into the liquid and runs without the shaft seal. The transmission is installed on the motor support seat by the vertical motor and connected with the pump by the coupling.

UK GRIMMImported liquid slurry pumptechnical parameters:

Flow rate: 12-413m3/h

Lift: 4-60m

Caliber: 50-200mm

Speed: 730-1480r/min

Power: 1.1-90kw

Voltage: 380V

UK GRIMMImported liquid slurry pump scope of application:

The pump is mainly used for environmental protection, municipal engineering, power plant, aerated concrete, gas coking plants, oil refineries, steel mills, mining, paper, cement factory, food factory, printing and dyeing industry, heavy oil, diesel oil, liquid suction dirty liquid, slurry, mortar, sewage flow channel sand and the flow of the city sludge and sand containing residue fluid and corrosive liquids.