英國GRIMM格林進口紙漿泵 UK GRIMMImported pulppump

英國GRIMM格林進口紙漿泵概述：

進口紙漿泵是在GRZ型泵基礎上，消化吸收英國格林先進技術，結合造紙行業而設計的一種更新?lián)Q代產品，符合制漿、造紙工藝要求，主要事實6%以下濃度，還可用于輸送糖漿、淀粉、化學漿料、工業污水等。

英國GRIMM格林進口紙漿泵結構特點：

1、該泵為后開門結構，維修時不必拆卸管路。
2、泵的進出口法蘭按1.6MPa壓力設計。
3、葉輪采用三葉片(或六葉片)，敞開式葉輪，效率很高且不要軸向推力補償，易于維修，堵塞機會低。
4、泵軸由使用油潤滑的，重載耐磨擦的，進口SKF圓柱滾子 軸承和徑向推力球軸承(角接觸球軸承)組合支承。圓柱滾子軸承安裝在泵端，徑向推力球軸承則面對面安裝在傳動端 。
5、軸封主要有副葉輪動態密封、單端面機械密封、雙端面機械密封、填料密封，用戶可根據要求和實際使用工況選用。
6、葉輪采用石蠟精密鑄造并作動平衡效驗。
7、材料有鑄鐵、鑄鋼、普通不銹鋼、雙相不銹鋼四種。

英國GRIMM格林進口紙漿泵技術參數：

流 量：13-2300m3/h
揚 程：6-90m
口 徑：65-400mm
轉 速：980-1450r/min
功 率：0.75-280kw
電 壓：380V
溫 度：≤120℃
紙漿濃度：≤6%

英國GRIMM格林進口紙漿泵適用范圍：

1、制漿造紙

2、制糖淀粉
3、工業污水

4、環保工程

UK GRIMMImported pulp pumpsummary:

Imported pulp pump is GRZ type pump based on the digestion and absorption of the British Green advanced technology, a new product with papermaking industry and design, to meet the requirements of pulping and papermaking process, mainly in 6% following concentration, but also can be used for conveying syrup, starch, sizing chemicals, industrial wastewater etc..

UK GRIMMImported pulp pumpstructure characteristics:

1. The pump for the back door structure, maintenance without dismantling the pipeline.

2. The inlet and outlet flanges of pump are designed according to 1.6MPa pressure.

3. The impeller adopts three leaf (or six blade), open impeller, high efficiency, and no axial thrust compensation, easy maintenance, low blocking opportunities.

4.Pump shaft by oil lubrication, heavy-duty wear-resistant, imported SKF cylindrical roller bearings and radial thrust ball bearings (angular contact ball bearings) composite support. The cylindrical roller bearings are installed at the pump end, and the radial thrust ball bearings are mounted face to face at the drive end.

5. The main shaft seal impeller dynamic seal, single end mechanical seal, double end mechanical seal, packing seal, the user can according to the requirements and actual use conditions selection.

6. Using wax precision casting and impeller dynamic balance test.

7. The material has cast iron, cast steel, ordinary stainless steel, duplex stainless steel four kinds.

UK GRIMMImported pulp pumptechnical parameter:

Flow rate: 13-2300m3/h

Lift: 6-90m

Caliber: 65-400mm

Speed: 980-1450r/min

Power: 0.75-280kw

Voltage: 380V

Temperature: less than or equal to 120 DEG C

Pulp concentration: less than 6%

UK GRIMMImported pulp pumpscope of application:

1. Pulp and paper

2. Sugar starch

3. Industrial sewage

4. Environmental protection engineering