英國GRIMM格林進口三柱塞高壓往復泵 UK GRIMMImported three plunger high pressure reciprocating pump

英國GRIMM格林進口三柱塞高壓往復泵概述：

進口三柱塞高壓往復泵是英國格林先進技術生產的超高壓柱塞泵，壓力最高達200MPa。流量為高壓水射流所需的適中流量0.71L/min-1791L/min，適于做超高壓水射流清洗、金屬切割、船舶清洗除銹及工廠、制糖廠、發電廠等的冷凝器、熱交換器、蒸發器、鍋爐及各種罐釜的除垢清洗。即可泵送清水、乳化液，亦能泵送其它具有化學性質的液體。

英國GRIMM格林進口三柱塞高壓往復泵結構原理:

進口三柱塞高壓往復泵為臥式三柱塞單作用泵。泵的結構為對稱布置。液體進出口連接管可在液加端二測選一則裝接，整套設備都安裝在同一公共底架上。

動力端：
機 身---全對稱箱式鋼性鑄件，機身下部設計成油池。
曲 軸---優質碳素鋼鍛件。
連 桿---鋅鋁合金精鑄件。
十字頭---鋼質筒形，簡單耐用。
液力端：
材 料---針對輸送介質選定?？蔀椋禾间摗ⅠR氏體不銹鋼、奧氏體不銹鋼、超低碳不銹鋼等。
密封結構---按輸送介質，工作壓力選定。密封材料可為：成型橡膠圈、碳纖維、麻纖維、芳綸等。
進排液閥---按介質壓力與流量選定?？蔀槠桨彘y、球閥、錐閥等。
潤滑方式與油品牌號：
飛油潤滑---潤滑方法簡單可靠。
油品牌號---N220#極壓齒輪油。

英國GRIMM格林進口三柱塞高壓往復泵性能特點：

●適用于：閥門管道試壓泵、高壓清洗泵、計量泵、流程泵、加藥泵、液壓泵、輸油泵等專業的用泵；高壓和超高壓清洗泵，石油、化工、化肥流程泵銅液泵，油田、鹽礦注水泵，液態二氧化碳泵，五鈉料漿泵、鋼廠除磷泵、除銹泵。
●組裝型式：有臥式、固定式、移動式。
●傳動型式：有電動機、柴油機、齒輪箱、皮帶輪、電磁調速、變頻調速。
●每個品種的泵都裝有安全調壓閥，泵的壓力可任意調節。
●你選型時如果流量不合適，可用電磁調速，變頻調速，變換柱塞直徑來調節流量，滿足選型需要。
●泵體材料：合金鋼、馬氏體、奧氏體不銹鋼、316、316L雙相鋼。

英國GRIMM格林進口三柱塞高壓往復泵技術參數：

流量范圍：0.5-1791L/min
工作壓力：2-200MPa
泵 轉 速：60-500r/min
電機功率：0.5-350kw
泵 行 程：20-150mm
泵 推 力：350-12000kg
柱塞直徑：10-130mm

英國GRIMM格林進口三柱塞高壓往復泵用途：

適用于做管道清洗、工件清洗、表面清洗、清砂、除銹、液體輸送、液體傳動、工程掘進等，以及各種膠管、金屬管、油田鉆井井口設備試壓用泵，即可泵送清水、乳化液，亦能泵送其它具有化學性質的液體。

UK GRIMMImported three plunger high pressure reciprocating pumpsummary:

Imported three plunger high pressure reciprocating pump is a super high pressure piston pump produced by Green advanced technology in England. The pressure is as high as 200MPa. Moderate 0.71L/min-1791L/min flow required for high pressure water jet, suitable for ultra high pressure water jet cleaning, metal cutting, ship cleaning derusting and factory, sugar factory, power plant condenser, evaporator, heat exchangers, boilers and various cleaning tanks. It can pump clean water, emulsion, and other liquid with chemical property.

UK GRIMMImported three plunger high pressure reciprocating pumpstructure principle:

Imported three plunger high pressure reciprocating pump is horizontal three plunger single acting pump. The structure of the pump is symmetrically arranged. The liquid inlet and outlet connecting pipe can be measured and selected at the liquid adding end two, and the whole set of equipment is installed on the same public underframe.

Power end:

Fuselage --- full symmetrical box type steel casting, the lower part of the fuselage is designed as an oil tank.

Crankshaft -- high quality carbon steel forgings.

Connecting rod --- zinc aluminum alloy castings.

Crosshead --- steel cylinder, simple and durable.

Hydraulic end:

Material --- selected for conveying medium. Can be: carbon steel, martensitic stainless steel, austenitic stainless steel, ultra low carbon stainless steel, etc..

Sealing structure --- according to the transmission medium, the working pressure is selected. The sealing material can be formed rubber ring, carbon fiber, hemp fiber, aramid fiber and so on.

Inlet and outlet valves are selected according to medium pressure and flow rate. Flat plate valve, ball valve, cone valve, etc..

Lubrication method and oil brand number:

Grease lubrication --- the method of lubrication is simple and reliable.

Oil number ---N220# extreme pressure gear oil.

UK GRIMMImported three plunger high pressure reciprocating pumpperformance characteristics:

Suitable for: pump pump, high pressure cleaning pump, metering pump, flow pump, dosing pump, hydraulic pump, oil pump and other professional test valves; high pressure and ultra high pressure cleaning pump, petroleum, chemical, chemical process pump copper liquid pump, oil, salt water injection pump, liquid carbon dioxide, sodium five the slurry pump, pump, pump rust removal of steel.

Assembly type: horizontal, stationary and mobile.

Driving type: motor, diesel engine, gear box, belt pulley, electromagnetic speed regulation, frequency conversion speed regulation.

Every type of pump is equipped with a safety pressure regulating valve, and the pressure of the pump can be adjusted at will.

When you type, if the flow is not appropriate, you can use electromagnetic speed regulation, variable frequency speed control, change the diameter of the plunger to adjust the flow rate, to meet the needs of type selection.

Pump material: alloy steel, martensite, austenitic stainless steel, 316 and 316L dual phase steel.

UK GRIMMImported three plunger high pressure reciprocating pumptechnical parameter:

Flow range: 0.5-1791L/min

Working pressure: 2-200MPa

Pump speed: 60-500r/min

Motor power: 0.5-350kw

Pump stroke: 20-150mm

Pump thrust: 350-12000kg

Plunger diameter: 10-130mm

UK GRIMMImported three plunger high pressure reciprocating pumppurpose:

Suitable for pipeline cleaning, workpiece cleaning, surface cleaning, cleaning, derusting, liquids, liquid transmission, engineering excavation, and all kinds of rubber hose, metal pipe, drilling wellhead equipment, oil pressuretest pump can pump water, emulsion, also can pump with other chemical properties of liquids.